Keep Doors From Slamming With These 10 Tips

Are you the kind of a person who likes to watch horror movies before bed and is afraid to move around the house at night and constantly hear strange noises near the door? Do you know the situation when you are fright by a sharp slamming of the door, but there is no one in the room but you? We can reassure you, you are not going crazy, and there are no ghosts. The thing is, your door plays around a little bit, but you can stop slamming doors, and we will show how.

Hard door slams or creaking can occur for many reasons. So, perhaps there is a draft in your house, or you installed the door incorrectly, which leads to closing under its weight. There can be many reasons for this. However, the problem already exists and needs to be solved somehow.

Fortunately, there are many solutions ranging from door seals and silencers to unique closers and weather-stripping kits. For each case, there is sure to be the right solution to the problem.

This article will look at 10 practical methods to prevent door slamming.

What Makes the Door Slam?

Three primary factors contribute to door slamming: poor installation, warped door frames, and unbalanced doors. Let’s take a closer look at each of these.

Poor Installation	If a door is not installed correctly, it will likely slam. This is because the door will not be level with the frame, which will cause it to swing shut on its own.
Warped Door Frames	Over time, door frames can warp due to changes in temperature or humidity. This can cause the door to no longer fit snugly in the frame, which allows gaps that allow air to pass through.
Unbalanced Doors	If a door is not balanced correctly, it will tend to slam shut. This is because the door’s weight is not evenly distributed, which causes it to swing shut on its own.

How to Stop Door Slamming?

Does the sound of a door slam shut make your nerves jangle? You can prevent door slams with a few basic changes. Here you can find only life hacks that work in everyday life and choose only those methods that do not require significant financial funds, and you can do them in almost any city and home with a minimum amount of equipment.

Although there are many reasons for slamming doors, fortunately, there are many more solutions, so everyone will find several alternatives for themselves at once and choose the most suitable one for their case. In addition, our solutions will not spoil the design of your home and will fit perfectly into the interior.

So, check your door hinges, and if they are tight, read on to find a solution to your problem.

1. Door Seals

Door seals are a great way to protect your door from hard bangs and prevent drafts from getting in. Often, door seals are visually similar to folded towels and are designed to be installed at the bottom of a door.

Yet, before buying such a device, you should ensure it will work. To do this, roll a towel into a tube and place it under your door. Throughout the day, pay attention to whether your door slams or not. If there is no issue, you can purchase a beautiful seal that perfectly complements your design.

2. Bumper

Another cheap solution to a slamming door is a special bumper that mounts to the wall. So, most often, in the kit, there will be several products from different materials and colors at once. Commonly, door bumpers are made of plastic, rubber, and foam.

Bumpers have several key advantages at once:

• Easy to install. Most often, they are glued to the wall at the point where the door handle comes into contact with it.
• Price. This solution costs a few dollars but gives an effective result.
• Design. Because door bumpers are small in size and transparent, they will look great with literally any design.

Nevertheless, the bumper for the door will not help if the door slams since the bumper only help in case of door-to-wall collisions.

3. Finger Pinch Guards

This anti-door slamming method was originally intended as a tool to protect children’s fingers from doors.

So, you need to purchase several protectors at once and fix one at a time for as many doors as you need. And as the material wears out, you can replace it. Such a tool will create a small gap of a few centimeters between the door and the door frame and will not allow the door to close completely.

While this method helps provide finger protection and prevent slamming doors, it is also completely unsuitable if you want a completely closed door.

4. Dreambaby Stop Slam

This easy-to-use and install mechanism does a great job of protecting fingers and removing door slams. Many people think this mechanism is not the best to use, but it has proven its effectiveness in practice. Installing the device is simple, and the size and appearance make it possible to fit this mechanism into any design perfectly.

In addition, this device helps both protect fingers from impacts and allows the door to close completely when the previous method leaves a gap.

5. Anti-Door Slam Products

This group of devices can look completely different. The market offers various solutions with different designs, from door bumpers to floor fuses. The floor door slam guard is also great for protecting you from sudden frights and fits perfectly into any interior.

But, while this method can be ideal for preventing slamming doors and toe protection, it could injure your toes. So, you may not even notice the floor fixer and stumble at night. Therefore, this method is better not to use if you have small children who strive to look into every corner of your house.

6. Door Closer

The pneumatic door closer is the best of the methods but, at the same time, the most expensive solution against slamming doors. So, this complex mechanism will be great to help with door slams and finger protection.

7. Get Rid of Drafts

You should check your house for drafts if your door is installed correctly and the hinges are firmly tightened. Although this method may take a little longer than installing a door closer or bumper, getting rid of the draft can solve two problems in your home at once.

You can:

• Save on utility/electricity bills. Due to the draft, people are most likely to get cold in winter and autumn, which encourages you to increase the level of heating or use the heater more often.
• Get sick less. A draft often provokes a cold, which knocks us off our feet and out of the rhythm of life.

Once you fix the draft problem in your home, your doors can stop door slamming.

8. Adjust the Door Setting

Also, a great option would be to check the correctness of the door installation. Perhaps it is installed crookedly and closes under its weight, frightening all the inhabitants of your house. Adjust the installation level of your door if necessary.

9. Weather-Stripping Kit

Such method is somewhat similar to a door seal but looks a little different and requires more complex installation. So, you need to glue a special protective tape around the door’s perimeter. To do this, measure the required length, cut the tape and stick it on the door. You will not need to dig for additional tools, as the kit will have everything you need.

This method helps protect your home and heart from constant door slamming and will help keep your door looking its best for years to come.

10. Replace Door Hinges

One easy way is also to check your door hinges. If they are outdated, you should replace them, and then your problem will be solved.

Bottom Line

If you have a door in your home that slams shut, several things you can do to help prevent it. These 10 tips should give you a good starting point. Try one or more of these methods and see if they work for you. And if all else fails, you can always call a professional to help fix the problem.

FAQ